From DT Online
Pin Punches are also known as Drifts and are used to punch pins out of holes.
Features and Uses
- The lowest cost option is to use a hand-held punch with a hammer but a wide range of automatic punches are available - both Dot Punches and Centre Punches.
- In general, Dot Punches have a sharper point (i.e. 60° instead of 90°) and need only the lower ranges of impact force (e.g. 20N to 50N).
- Automatic punches are simply pushed down against the work-piece and do not need to be struck - indeed, should NOT be struck with a hammer.
|Centre Punch||Automatic Centre Punch||Bell Centre Punch||Nail Punch||Pin Punch||Hollow Punch Set||Number and Letter Punch Set|