Actions

555 Timer

From DT Online

Revision as of 16:35, 27 January 2018 by DT Online (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Signetics NE555N.JPG


Description

The 555 Timer chip is designed to function as a monostable (one stable state) multivibrator or as an Astable (free running) multivibrator.


Features and Applications

It contains the equivalent of approximately 20 transistors, resistors, diodes etc. It is used for timing or switching circuits which give pulsed or digital outputs.

555Timer.jpg

Data: Pin

  1. connected to the negative (-ve) supply
  2. TRIGGER a voltage greater than 1/3 supply volts enables the chip.
  3. OUTPUT is equal to the supply volts when the output is on (600mW max).
  4. RESET when connected to positive supply volts.
  5. CONTROL OUTPUT applying a variable voltage to this pin varies the frequency of the output.
  6. THRESHOLD a voltage higher than the threshold voltage (2/3 supply volts) turns on the output.
  7. DISCHARGE when the output is turned on the pin goes to 0v allowing discharge of any connected capacitor.
  8. positive supply voltage (+ve) (4.5v - 16v)

Uses: Oscillators, triggers, inverters, timers.


DT Online Buyers' Guide
Transistor selection NPN and PNP BC108 Transistor BC547B Transistor BFY51 Transistor Darlington Transistors 555 IC Timer 741 Operational Amplifier Quad 2-input NOR Gate 14 Pin Logic IC Quad 2-input NAND Gate 14-DIP Logic IC
Transistor selection NPN and PNP BC108 Transistor BC547B Transistor BFY51 Transistor Darlington Transistors 555 IC Timer 741 Operational Amplifier Quad 2-input NOR Gate 14 Pin Logic IC Quad 2-input NAND Gate 14-DIP Logic IC