BFY51 Transistor: Difference between revisions
From DT Online
m (DT Online moved page BFY51 to BFY51 Transistor without leaving a redirect: Improved clarity) |
m (Added category links) |
||
| Line 9: | Line 9: | ||
* Current handling capacity 1 Amp max. | * Current handling capacity 1 Amp max. | ||
* Amplification (gain) greater than 50. | * Amplification (gain) greater than 50. | ||
[[Category:Secondary]] | |||
[[Category:Electronics and Control]] | |||
[[Category:Materials and Components]] | |||
Revision as of 15:23, 1 June 2015
The BFY51 Collector is connected to the positive (+ve) supply via the load. NB If the load is inductive i.e. has coil windings such as a relay, solenoid or motor, then it is usual to connect a diode across it to prevent the Back EMF from damaging the transistor. (Cathode to supply). The input is connected to the Base via a limiting resistor (typically 1K). The Emitter is connected to the negative (-ve) supply (0V).
Uses: As current amplifiers and electronic switches, for example, Motor Drive Amplifiers, Audio Amplifiers.
Data: Voltage between Collector and Emitter 6 - 30Volts max.
- Power handling capacity 800mWatts max.
- Current handling capacity 1 Amp max.
- Amplification (gain) greater than 50.