Bench Shears and Guillotines: Difference between revisions
From DT Online
(Bench Shears and Guillotines) |
(No difference)
|
Revision as of 18:43, 23 October 2014
Bench Shears and Guillotines can be fixed to a bench and used to cut thicker gauge materials.
Conventional Shears are based on a scissor action which leaves one part of the material distorted but a Notcher progressively blanks out a thin strip of material while leaving both sections undistorted. The notch, or thin and undistorted slot produced, can itself be a useful sheet metal outcome.
Bench Guillotines can cut sheet with minimum distortion of the cut pieces. Small Bench Guillotines can be used accurately to cut pcb board for example.