Actions

Bench Shears and Guillotines

From DT Online

Revision as of 16:17, 28 April 2015 by DT Online (talk | contribs) (Added category links)

Bench Shears and Guillotines can be fixed to a bench and used to cut thicker gauge materials.

Conventional Shears are based on a scissor action which leaves one part of the material distorted but a Notcher progressively blanks out a thin strip of material while leaving both sections undistorted. The notch, or thin and undistorted slot produced, can itself be a useful sheet metal outcome.

Bench Guillotines can cut sheet with minimum distortion of the cut pieces. Small Bench Guillotines can be used accurately to cut pcb board for example.

Bench Shears and Guillotines