Centre Bit: Difference between revisions
From DT Online
(Added Template) |
mNo edit summary |
||
| Line 1: | Line 1: | ||
[[File:CentreBit.png|200px|right]] | [[File:CentreBit.png|200px|right]] | ||
__TOC__ | __TOC__ | ||
=====Description===== | =====Description===== | ||
[https://en.wikipedia.org/wiki/Drill_bit#Center_bits '''Centre Bits'''] were designed principally for use with a '''[[Carpenter's Brace]]''' and usually have a [https://en.wikipedia.org/wiki/Drill_bit_shank#Brace_shank '''Square Tapered Shank'''] for this purpose. | [https://en.wikipedia.org/wiki/Drill_bit#Center_bits '''Centre Bits'''] were designed principally for use with a '''[[Carpenter's Brace]]''' and usually have a [https://en.wikipedia.org/wiki/Drill_bit_shank#Brace_shank '''Square Tapered Shank'''] for this purpose. | ||
=====Features and Uses===== | =====Features and Uses===== | ||
They have a central guide point ''(originally filed to a triangle)'', a ''spur'' to sever the wood fibres around the circumference, and a single, chisel-edge cutting blade to remove the waste. | They have a central guide point ''(originally filed to a triangle)'', a ''spur'' to sever the wood fibres around the circumference, and a single, chisel-edge cutting blade to remove the waste. | ||
---- | ---- | ||
<span style="color: green">'''Note:''' | <span style="color: green">'''Note:''' | ||
Latest revision as of 19:10, 20 August 2016
Description
Centre Bits were designed principally for use with a Carpenter's Brace and usually have a Square Tapered Shank for this purpose.
Features and Uses
They have a central guide point (originally filed to a triangle), a spur to sever the wood fibres around the circumference, and a single, chisel-edge cutting blade to remove the waste.
Note: Most wood bits will cause splitting if an attempt is made to drill straight through the material. Best practice is to drill from one side until the tip emerges on the reverse then turn the wood around and complete drilling from the other side.
