Construction Workshop Example 1

This workshop is intended particularly for examination level and vocational courses which focus on the use of wood to make functional products - it may also be use by younger pupils for general D&T work if timetable constraints dictate.

There will most often be a storeroom adjacent plus doors into the workshop and a door to the outside.

The workshop may also have access to a shared Heat Area, shared machining area and/or a collaborative project space - this is unlikely to alter the equipment inside the room but may increase the use of mobile equipment on braked trolleys brought in temporarily from outside .

---

Note: The light grey shaded areas around each machine tool indicate the safety areas which should be left clear between machines. The orange coloured strips alongside the safety areas indicate permissible overlaps between them.

---

Description	Code	Notes	Image
Technology Bench	LFTAB20	1200mm x 1200mm and also 1000mm x 1000mm sizes available with optional vice rack and/or cupboard - LFSPF33 is an alternative. One bench shown split to make half adjustable height with two vices.	Image
Bandsaw	FESEQ339	bolt down next to materials store room with good 'run-off' space as shown.	Image
Dovetail Router	LESEQ368	can be mounted on bench or braked trolley - a safe and innovative method for high accuracy jointing of timber frames.
Scroll Saw	LESEQ320	can be mounted on bench, a braked trolley or mounting board fixed in a vice.	Image
Bench Drill	FESEQ472	position away from corners to avoid crowding in use and bolt to side bench top.	Image
Bag Store	LFSTR62	almost always needed in a practical room to avoid danger of bags on floor.	Image
DT Storage Wall	FFFFU60	Fitted out to take small tools etc. and includes IWB tray unit, magnetic WB, plus pull-out fully serviced teacher caddy/desk. Position 90deg to windows.	Image
Waste Bin	LEOTR487	in workshops needed for: paper, metal, wood, plastics, glass, plus non-recycle.	Image
Bag Press	LESEQ635	can be used on bench, braked trolley or stored inside a cupboard until needed - used for laminating and cold moulding with veneers.	Image
Bandfacer	FESEQ304	should be fixed near centre of wall to avoid crowding - includes own dust extraction	Image
Morticer	FESEQ336	position near centre of wall to allow for mortising long length	Image
Pillar Drill	FESEQ301	position near centre of wall to avoid crowding - MUST be bolted down - head can be height adjusted to accommodate wheelchair users - esp. if 2 machines	Image