AutoDotPunch.png: Difference between revisions

Revision as of 10:17, 24 April 2016

Automatic Dot Punch : DT Online Recommendations

The lowest cost option is to use a hand-held punch with a hammer but a wide range of automatic punches are available - both Dot Punches and Centre Punches.

In general, Dot Punches have a sharper point (i.e. 60° instead of 90°) and need only the lower ranges of impact force (e.g. 20N to 50N).
Automatic punches are simply pushed down against the work-piece and do not need to be struck - indeed, should NOT be struck with a hammer.

File history

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	08:39, 4 August 2015		307 × 307 (10 KB)	DT Online (talk \| contribs)	Automatic Dot Punch

You cannot overwrite this file.

File usage

There are no pages that use this file.

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitise it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Horizontal resolution	37.79 dpc
Vertical resolution	37.79 dpc
File change date and time	17:23, 31 July 2015

@@ Line 4: / Line 4: @@
-The lowest cost option is to use a hand-held punch with a hammer but a wide range of automatic punches are available - both [https://en.wikipedia.org/wiki/Punch_(tool)#Prick_punch '''Dot Punches'''] and [https://en.wikipedia.org/wiki/Punch_(tool)#Centre '''Centre Punches''']. In general, '''Dot Punches''' have a sharper point ''(i.e. 60° instead of 90°)'' and need only the lower ranges of impact force ''(e.g. 20N to 50N)''. Automatic punches are siimply pushed down against the work-piece and do not need to be struck - indeed, should '''NOT''' be struck with a hammer.
+The lowest cost option is to use a hand-held punch with a hammer but a wide range of automatic punches are available - both [https://en.wikipedia.org/wiki/Punch_(tool)#Prick_punch '''Dot Punches'''] and [https://en.wikipedia.org/wiki/Punch_(tool)#Centre '''Centre Punches'''].
+* In general, '''Dot Punches''' have a sharper point ''(i.e. 60° instead of 90°)'' and need only the lower ranges of impact force ''(e.g. 20N to 50N)''.
+* Automatic punches are simply pushed down against the work-piece and do not need to be struck - indeed, should '''NOT''' be struck with a hammer.

File