Actions

Forstner Bits: Difference between revisions

From DT Online

(Created Article)
 
mNo edit summary
Line 3: Line 3:




They take some force to push them through the timber, so are best suited to use in a '''[[Drill Press]]'''. Since they locate mainly on their rim, with only a small central point, it is possible to drill a series of overlapping holes ''(e.g. to clear the waste from a '''[[Housing Joint]]''')''.
Some force is required to push them through the timber, so are best suited to use in a '''[[Drill Press]]'''. Since they locate mainly on their rim, with only a small central point, it is possible to drill a series of overlapping holes ''(e.g. to clear the waste from a '''[[Housing Joint]]''')''.





Revision as of 21:31, 30 October 2015

ForstenerBit.png

Forstener Bits are excellent at producing clean flat-bottomed holes in wood (e.g. to locate Euro Hinges on kitchen unit doors).


Some force is required to push them through the timber, so are best suited to use in a Drill Press. Since they locate mainly on their rim, with only a small central point, it is possible to drill a series of overlapping holes (e.g. to clear the waste from a Housing Joint).


Their name is derived from their inventor, Benjamin Forstner, an American gunsmith who patented the design in 1874. Saw Tooth variants are now available which cut a little faster and are more suitable for drilling into end grain.