From DT Online
Revision as of 21:40, 11 August 2016 by DT Online (Added Template)
The square chisels used are sharpened square tubes inside which an Auger Bit revolves to remove the bulk of the waste as the chisel is pressed into the workpiece. Although this can be quite slow for production work, the hollow chisel is easy to change when different size mortises are needed making them ideal for small scale furniture production.
A Mortising Attachment can usually be fitted to a Drill Press and for occasional use by an individual, this avoids the cost of an additional machine. The cutting tool (i.e. the Auger Bit) is almost completely enclosed within the hollow chisel making them relatively safe to use.
An alternative for heavier work is a Chain Mortiser but the mortise they cut can have rough edges where the chain exits the mortise so they are not suitable for fine furniture making. They are similar in operation to a Chain Saw and not recommended for use in schools.
- Stands for Portable Power Drills are inexpensive and adequate if only light work mainly in wood and plastics is intended.
- For more general purpose home workshop use choose a bench drill.
- The floor-mounted drill shown is for more arduous use drilling larger diameters.
- A combined Milling/Drilling machine would be a popular choice for Model Engineers and in home workshops.
- Mortisers comprise an Auger Bit inside a hollow square chisel which squares off the hole as it is drilled (Mortising attachments for Drill Presses are also available)
- Mini-drills and PCB Drills are useful for modelling and for drilling holes in circuit boards to receive eletronics components.