Actions

PCB Drill

From DT Online

Revision as of 18:58, 26 February 2016 by DT Online (talk | contribs) (Added link)
PCBdrills.png

Individual electronic control circuits (e.g. resulting from use of the DT Online PCB Designer) can be made using Photo-Etching or by cutting away material from a Copper-Clad board using a CNC Milling Machine or CNC Engraver for example. Components are added by drilling small holes through the board and soldering them into place. This is known as Through Hole Technology (as opposed to Surface-Mount).


The component mounting holes can be drilled using a low-volt hand-held drill running at high speed and with a 1.5mm or 2mm diameter drill bit in the Collet Chuck. Such small drills can easily break and more precision is obtained if the drill is held in a stand (or a standard Drill Press) is used. Care must be taken to let the drill do the work and not to force the drill into the PCB. It will help if the circuit board is first taped by its edges to a flat backing board of MDF for example.


Printed Circuit Boards (PCBs) are usually made of Fiberglass, which is highly abrasive, and so will quickly wear out HSS drills if many holes are to be drilled. Specialist drill bits with Tungsten Carbide tips are available and these are used, together with CNC drills, in industry.