Actions

Resistant Materials Workshop Example 1

From DT Online

Revision as of 18:08, 20 February 2017 by DT Online (talk | contribs) (Added Product)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Here students will work in a range of materials including metals, wood and plastics to create mainly domestic products.


These will be the main workshops used by younger pupils (up to KS3) but also to service GCSE Product Design courses.


There will most often be a storeroom adjacent plus doors into the workshop and a door to the outside.


The workshop may also have shared Heat Area adjacent in which case will not need a Brazing Hearth or fume extraction - it could also link through to a shared machining area and/or a collaborative project space - this may remove the need for a metal lathe and also increase the use of mobile equipment on braked trolleys


Note: The light grey shade areas around each machine tool indicate the safety areas which should be left clear between machines. The orange coloured strips alongside the safety areas indicate permissible overlaps between them.


ResMats1.png


Description Code Notes Image
Technology Bench LFTAB20 1200mm x 1200mm and also 1000mm x 1000mm sizes available with optional vice rack and/or cupboard - LFSPF33 is an alternative. One bench shown split to make half adjustable height with two vices.
Bench.png
Braked Trolley LFTEB93 most bench-mounted equipment can also be fixed to a trolley with braked castors to aid flexibility by enabling specialist equipment to be shared between adjacent spaces. Mobile Workbench-Tool Box Tool Chest with Roller Tool Cabinet 6 Drawers Solid Design
Bandsaw FESEQ339 bolt down next to materials store room with good 'run-off' space as shown. Charnwood W730 14'' Woodworking Bandsaw
Line Bender LESEQ299 used to line bend sheets of acrylic - usually positioned on a side bench but can also go on workbench or trolley
ClarkeStripHeater.jpg
Scroll Saw LESEQ320 can be mounted on bench, a braked trolley or mounting board fixed in a vice. Scheppach SD1600F 230V Variable Speed Hobby Scroll Saw with 64Piece Accessory Set
Bench Drill FESEQ472 position away from corners to avoid crowding in use and bolt to side bench top. Draper 42640 230-Volt 650-Watt 16-Speed Heavy-Duty Bench Drill
Bag Store LFSTR62 almost always needed in a practical room to avoid danger of bags on floor. Songmics 9 Compartments Standing Storage Rack Shelving Organizer Units, Capacity/shelf:15 kg, Black LSN33H
DT Storage Wall FFFFU60 Fitted out to take small tools etc. and includes IWB tray unit, magnetic WB, plus pull-out fully serviced teacher caddy/desk. Position 90deg to windows.
DT TeachingWall5.png
Waste Bin LEOTR487 in workshops needed for: paper, metal, wood, plastics, glass, plus non-recycle. VonHaus 45L Litre Stainless Steel 3 in 1 Compartment Indoor Recycling Rubbish Pedal Bin
Thermoforming Centre LESEQ635 used for thermoforming plastics - a mobile unit - needs only a 'parking place' plus access to 13 Amp power
ThermoFormingCentre.png
Trimmer LESEQ324 mount on braked trolley or side bench - used to cut away waste from vacuum formings for example
Trimmer.png
Double-ended Polisher LEOTR487 either bench mounted or fixed to floor stand GR-TECH Instrument ® Dental Grinder Buffing Polishing Machine 220V 1400rpm
Bandfacer FESEQ304 should be fixed near centre of wall to avoid crowding - includes own dust extraction
Bandfacer.png
Lo-Temp Casting Kiln FESEQ336 used for casting in pewter and other low melting point alloys - position near heat proof top on side benching
507125 xl.png
Pillar Drill FESEQ301 position near centre of wall to avoid crowding - MUST be bolted down - head can be height adjusted to accommodate wheelchair users - esp. if 2 machines Draper 42642 12-Speed Heavy-Duty Drill Press
Metal Turning Lathe FESEQ633 bolt securely to the floor. CLARKE METAL LATHE 6 SPEED with SCREW CUTTING 430mm