From DT Online
Revision as of 16:31, 9 September 2016 by DT Online (Created article)
Features and Applications
Scribers are sharpened to a 30 degree point by holding them Tangentially to a Tool Grinder and rotating them. This tends to create grinding marks which run along the point and strengthen it rather than weakening it by going across.
Note: When scribing lines for bending or folding sheet metal (or plastics) always mark on the surface that will become the inside of the bend. In this way, Compressive Forces will close up the scribed line during bending, whereas if on the outside, Tensile Forces would open it up and may cause the material to tear or fracture.
Note: To make scribed lines stand out more, bright steel can be coated with Marking Blue (or a felt tipped pen) whilst black steel or rusty metal can first be rubbed with chalk.
|Woodwork Marking Knife||Carpenters Pencil||Engineers Scriber||Engineers Marking Blue and Layout Fluid||Engineers French Chalk||Chalk Line||Fabric Marker Pens||Tailors Chalk|