Actions

Difference between revisions of "Scroll Saw"

From DT Online

m (Improved presentation)
m (Added Templates)
Line 11: Line 11:
 
To cut internal shapes, small holes are first drilled in the material through which to thread the blade
 
To cut internal shapes, small holes are first drilled in the material through which to thread the blade
 
</span>
 
</span>
 +
 +
 +
{{Primary Tools and Equipment}}
 +
{{Secondary Tools and Equipment}}

Revision as of 18:22, 18 December 2014

Scroll Saw.jpg

Scroll Saws are a powered Fretsaw and often chosen for fret work, Piercing Saw work (if a metal cutting blade is fitted) or as an alternative to a Coping saw.

Blades are normally clamped in place such that the saw cuts on the downstroke, pulling the workpiece against the table.


Safety Point! All machinery can be hazardous and fingers can come into contact with the blade - these oscillate so tend to vibrate soft materials rather than cut them however. Eye protection should be worn and care taken to avoid inhaling any dust.


Note: To cut internal shapes, small holes are first drilled in the material through which to thread the blade


Template:Primary Tools and Equipment Template:Secondary Tools and Equipment