Actions

Spotfacing

From DT Online

Revision as of 19:51, 20 December 2015 by DT Online (talk | contribs) (Corrected Link)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
SpotFacing.png


Spotfacing is used primarily to create a clean, flat seating to receive bolt heads and washers passing through drilled holes, particularly in castings where the surface finish may be rough.


It is important to provide a good flat seating under bolt heads to ensure an even distribution of force which otherwise might lead to the bolt shearing or the casting cracking.