Actions

TIP120 Series Transistors

From DT Online

Revision as of 11:31, 3 July 2016 by DT Online (talk | contribs) (Added Template)


Description

The TIP120 Series Collector is connected to the positive (+ve) supply via the load. NB If the load is inductive i.e. has coil windings such as a relay, solenoid or motor, then it is usual to connect a diode across it to prevent the Back EMF from damaging the transistor. (Cathode to supply). The input is connected to the Base via a limiting resistor (typically 1K). The Emitter is connected to the negative (-ve) supply (0V).


Features and Applications

Uses: As current amplifiers, audio amplifiers and electronic switches, for example, Motor Drive Amplifiers, Relay Drive Amplifiers.


Data: The TIP 120 series transistors are Darlington Pairs i.e. they have 2 transistors in the one package, which gives them the advantage of higher power handling and gain.

  • Voltage between Collector and Emitter 6 - 60 Volts max.
  • Power handling capacity 60 Watts max.
  • Current handling capacity 5 Amps max.
  • Amplification (gain) greater than 1000.


DT Online Buyers' Guide
Transistor selection NPN and PNP BC108 Transistor BC547B Transistor BFY51 Transistor Darlington Transistors 555 IC Timer 741 Operational Amplifier Quad 2-input NOR Gate 14 Pin Logic IC Quad 2-input NAND Gate 14-DIP Logic IC
Transistor selection NPN and PNP BC108 Transistor BC547B Transistor BFY51 Transistor Darlington Transistors 555 IC Timer 741 Operational Amplifier Quad 2-input NOR Gate 14 Pin Logic IC Quad 2-input NAND Gate 14-DIP Logic IC