Actions

Tensile Strength

From DT Online

Revision as of 18:27, 21 December 2015 by DT Online (talk | contribs) (Created article)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
TensileTestRig.png

Tensile Strength is a measure of how much a material can resist being stretched or pulled apart and Ultimate Tensile Stress (U.T.S.) is the most stress that may be applied before the material breaks.


Data from which to calculate the Tensile Strength of material samples, can be obtained using the rig shown opposite. Such equipment is known as a Tensometer and industrial devices are used to measure how much a material sample stretches under stress to determine tensile properties of materials, such as its Tensile Strength.


Samples of thin line or wire may be gripped and stretched. The load applied is divided by the cross-sectional area of the test piece and this provides the value for the Tensile Stress being applied and any change in length divided by the original length will provide a value for Tensile Strain.


The load required to break the sample is the Ultimate Tensile Strength (U.T.S.) of the material.