Actions

Toolmakers Clamps

From DT Online

Revision as of 15:56, 29 September 2016 by DT Online (talk | contribs) (Added Template)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
UsingToolmakersClamp.jpg


Description

Toolmakers Clamps are used in precision work to hold thin pieces together whilst they are drilled for example - as shown.


Features and Applications

A similar task can be achieved using a Hand Vice, Vice Grip or Mole Grips.


Safety Point! Always hold work using a clamp or vice, or clamp it firmly to the machine table, when drilling - especially when drilling large holes in thin sheet metal because the drill can grab and spin the metal when it breaks through.


Hand held vices and grips


DT Online Buyers' Guide
Record 4in Workshop Vice Stanley Light-Duty Vice Draper 75 mm Bench Vice Hand Vice Pin Vice Locking Pliers Toolmakers Parallel Clamp Drill Press Vice Tilt and Swivel Machine Vice Rotating Swivel Base Machine Vice
Record 4in Workshop Vice Stanley Light-Duty Vice Draper 75 mm Bench Vice Hand Vice Pin Vice Locking Pliers Toolmakers Parallel Clamp Drill Press Vice Tilt and Swivel Machine Vice Rotating Swivel Base Machine Vice