View source for Precision Mitre Saw

[[File:PrecisionMitreSaw.png|200px|right]]	
A '''Precision Mitre saw''' is used for the accurate cutting of various angles or [http://en.wikipedia.org/wiki/Miter_joint '''mitres'''] on picture frames, architraves, etc. It comprises a guided frame saw with replaceable blades and a saw table with adjustable length stops and material '''[[Clamps and Cramps|clamps]]'''. The saw assembly can be swivelled to the required angle and locked into position where it is guided to produce accurate cuts.

It is recommended for use especially where strips of timber or plastics have to be cut either square or at specified angles accurately and where perhaps there is not access to a fully equipped workshop. The saws are guided and therefore relatively safe to use even for young children and the replacement blades avoid the need for any resharpening.


[[Category:Primary]]
[[Category:Secondary]]
[[Category:Bench Top Equipment]]