Design and Technology Corner - Revision history

DT Online at 09:30, 10 February 2017

2017-02-10T09:30:45Z

← Older revision		Revision as of 09:30, 10 February 2017
Line 24:		Line 24:


	Such a display may include a labelled '''Shadow Board''' to indicate what tools are available and to where they must be returned after use. '''Shadow Boards''' may be wall mounted and provision could be made to attach removable '''Resource Boxes'''. These would normally contain commonly used resources and may be replaced or supplemented with other '''Resource Boxes''' which are loaded to match the needs of a particular topic. '''Shadow Boards''' may also be supplemented by other '''Tool Boards''' containing additional tools and equipment which should only be used under direct adult supervision.		Such a display may include a labelled '''[[Primary Toolboard - A2\|Shadow Board]]''' to indicate what tools are available and to where they must be returned after use. '''[[Primary Toolboard - A2\|Shadow Boards]]''' may be wall mounted and provision could be made to attach removable '''[[Primary Toolboard - A2\|Resource Boxes]]'''. These would normally contain commonly used resources and may be replaced or supplemented with other '''[[Primary Toolboard - A2\|Resource Boxes]]''' which are loaded to match the needs of a particular topic. '''[[Primary Toolboard - A2\|Shadow Boards]]''' may also be supplemented by other '''[[Primary Toolboard - A2\|Tool Boards]]''' containing additional tools and equipment which should only be used under direct adult supervision.


Line 31:		Line 31:
	=====Single Desk D&T Workspace=====		=====Single Desk D&T Workspace=====

	A single classroom table may be covered with a sheet of '''[[Manufactured Board\|Hardboard]]''', or similar, to create a suitable D&T work-surface ''('''[[Manufactured Board\|Hardboard]]''' placed reverse side up will also provide a non-slip surface)''. The table may placed under or near the D&T display space or the '''Tool Boards''' and '''Resource Boxes''' located on top of it.		A single classroom table may be covered with a sheet of '''[[Manufactured Board\|Hardboard]]''', or similar, to create a suitable D&T work-surface ''('''[[Manufactured Board\|Hardboard]]''' placed reverse side up will also provide a non-slip surface)''. The table may placed under or near the D&T display space or the '''[[Primary Toolboard - A2\|Tool Boards]]''' and '''[[Primary Toolboard - A2\|Resource Boxes]]''' located on top of it.


Line 47:		Line 47:


	The table may be located near to any wall displays of '''D&T Information Boards''', '''D&T Process Boards''' or displays of everyday artefacts relating to the current topic and the '''Tool Boards''' and a '''Tool Caddy''' or '''Resource Boxes''' located back to back on top of it. '''[[Engineers Vice\|Clamp-on Vices]]''' can be affixed to help secure the '''[[Manufactured Board\|Hardboard]]''' top and there should be space to position a '''Drill Stand''', held in place with a '''[[G Cramp]]''' and extra '''[[G Cramp\|G Cramps]]''' can be used if needed to secure the top.		The table may be located near to any wall displays of '''D&T Information Boards''', '''D&T Process Boards''' or displays of everyday artefacts relating to the current topic and the '''[[Primary Toolboard - A3\|Tool Boards]]''' and a '''[[Primary Toolboard - A3\|Tool Caddy]]''' or '''[[Primary Toolboard - A3\|Resource Boxes]]''' located back to back on top of it. '''[[Engineers Vice\|Clamp-on Vices]]''' can be affixed to help secure the '''[[Manufactured Board\|Hardboard]]''' top and there should be space to position a '''[[Hand Drill Stand\|Drill Stand]]''', held in place with a '''[[G Cramp]]''' and extra '''[[G Cramp\|G Cramps]]''' can be used if needed to secure the top.
	<div style="clear: both;"></div>		<div style="clear: both;"></div>
	[[File:Bench.png\|200px\|right]]		[[File:Bench.png\|200px\|right]]

DT Online: Added Template

2017-02-04T10:00:53Z

Added Template

← Older revision		Revision as of 10:00, 4 February 2017
Line 67:		Line 67:
	Workbenches for outdoor use are also available. These should be made from treated timber to prevent rotting and '''[[Engineers Vice\|Clamp-on vices]]''' used so they can be stored indoors to prevent their rusting.		Workbenches for outdoor use are also available. These should be made from treated timber to prevent rotting and '''[[Engineers Vice\|Clamp-on vices]]''' used so they can be stored indoors to prevent their rusting.

			{{Primary Toolkit}}

	[[Category:D&T Resources in Primary Schools]]		[[Category:D&T Resources in Primary Schools]]

DT Online at 17:52, 2 February 2017

2017-02-02T17:52:27Z

← Older revision		Revision as of 17:52, 2 February 2017
Line 48:		Line 48:

	The table may be located near to any wall displays of '''D&T Information Boards''', '''D&T Process Boards''' or displays of everyday artefacts relating to the current topic and the '''Tool Boards''' and a '''Tool Caddy''' or '''Resource Boxes''' located back to back on top of it. '''[[Engineers Vice\|Clamp-on Vices]]''' can be affixed to help secure the '''[[Manufactured Board\|Hardboard]]''' top and there should be space to position a '''Drill Stand''', held in place with a '''[[G Cramp]]''' and extra '''[[G Cramp\|G Cramps]]''' can be used if needed to secure the top.		The table may be located near to any wall displays of '''D&T Information Boards''', '''D&T Process Boards''' or displays of everyday artefacts relating to the current topic and the '''Tool Boards''' and a '''Tool Caddy''' or '''Resource Boxes''' located back to back on top of it. '''[[Engineers Vice\|Clamp-on Vices]]''' can be affixed to help secure the '''[[Manufactured Board\|Hardboard]]''' top and there should be space to position a '''Drill Stand''', held in place with a '''[[G Cramp]]''' and extra '''[[G Cramp\|G Cramps]]''' can be used if needed to secure the top.
			<div style="clear: both;"></div>
			[[File:Bench.png\|200px\|right]]
			[[File:FoldDownBench.png\|100px\|right\|link=https://www.amazon.co.uk/gp/product/B003D0K50Y/ref=as_li_qf_sp_asin_il_tl?ie=UTF8&camp=1634&creative=6738&creativeASIN=B003D0K50Y&linkCode=as2&tag=dton06-21]]
			[[File:OutsideBench.png\|100px\|right\|link=https://www.amazon.co.uk/gp/product/B004SKU1DY/ref=as_li_qf_sp_asin_il_tl?ie=UTF8&camp=1634&creative=6738&creativeASIN=B004SKU1DY&linkCode=as2&tag=dton06-21]]


	~~<div style="clear: both;"></div>~~
	~~[[File:Bench.png\|200px\|right]]~~
	~~[[File:FoldDownBench.png\|100px\|right]]~~
	~~[[File:OutsideBench.png\|100px\|right]]~~
	=====D&T Work Benches=====		=====D&T Work Benches=====

DT Online at 17:44, 2 February 2017

2017-02-02T17:44:09Z

← Older revision		Revision as of 17:44, 2 February 2017
Line 51:		Line 51:

	<div style="clear: both;"></div>		<div style="clear: both;"></div>
	[[File:Bench.png\|~~300px~~\|right]]		[[File:Bench.png\|200px\|right]]
			[[File:FoldDownBench.png\|100px\|right]]
			[[File:OutsideBench.png\|100px\|right]]
	=====D&T Work Benches=====		=====D&T Work Benches=====

DT Online at 17:37, 2 February 2017

2017-02-02T17:37:48Z

← Older revision		Revision as of 17:37, 2 February 2017
Line 58:		Line 58:

	A variety of bench tops are available and, optionally, small '''[[Carpenters Vice\|Wood Vices]]''' ''(as shown)'' may be added for general use, Small '''[[Engineers Vice\|Metal Vices]]''' can be fitted to blocks which are then gripped by the '''[[Carpenters Vice\|Wood Vice]]''' and for many operations ''(e.g. using a '''[[Coping Saw]]''')'' these may be preferable.		A variety of bench tops are available and, optionally, small '''[[Carpenters Vice\|Wood Vices]]''' ''(as shown)'' may be added for general use, Small '''[[Engineers Vice\|Metal Vices]]''' can be fitted to blocks which are then gripped by the '''[[Carpenters Vice\|Wood Vice]]''' and for many operations ''(e.g. using a '''[[Coping Saw]]''')'' these may be preferable.


			Fold-down workbenches are useful if space is limited or to use in different locations. They are also at a height more suitable for young children than some other commercially available benches.

DT Online at 16:09, 2 February 2017

2017-02-02T16:09:36Z

← Older revision		Revision as of 16:09, 2 February 2017
Line 34:		Line 34:


	A small clamp-on '''[[Engineers Vice\|Vice]]''' can be affixed and this will help secure the '''[[Manufactured Board\|Hardboard]]''' top in place ''(children will find a small [[Engineers Vice\|vice]] the easiest way to hold strips of wood as it is sawn for example)''.		A small clamp-on '''[[Engineers Vice\|Vice]]''' can be affixed and this will help secure the '''[[Manufactured Board\|Hardboard]]''' top in place and extra '''[[G Cramp\|G Cramps]]''' can be used if needed ''(children will find a small [[Engineers Vice\|vice]] the easiest way to hold strips of wood as it is sawn for example)''.


Line 47:		Line 47:


	The table may be located near to any wall displays of '''D&T Information Boards''', '''D&T Process Boards''' or displays of everyday artefacts relating to the current topic and the '''Tool Boards''' and a '''Tool Caddy''' or '''Resource Boxes''' located back to back on top of it. '''[[Engineers Vice\|Clamp-on Vices]]''' can be affixed to help secure the '''[[Manufactured Board\|Hardboard]]''' top and there should be space to position a '''Drill Stand''', held in place with a '''[[G Cramp]]'''		The table may be located near to any wall displays of '''D&T Information Boards''', '''D&T Process Boards''' or displays of everyday artefacts relating to the current topic and the '''Tool Boards''' and a '''Tool Caddy''' or '''Resource Boxes''' located back to back on top of it. '''[[Engineers Vice\|Clamp-on Vices]]''' can be affixed to help secure the '''[[Manufactured Board\|Hardboard]]''' top and there should be space to position a '''Drill Stand''', held in place with a '''[[G Cramp]]''' and extra '''[[G Cramp\|G Cramps]]''' can be used if needed to secure the top.

DT Online at 14:26, 2 February 2017

2017-02-02T14:26:34Z

← Older revision		Revision as of 14:26, 2 February 2017
Line 8:		Line 8:


	But this is not to say that children are not entitled a regular experience of Design and Technology. Improvement in tool skills, as with any other skill development, requires regular practice ''(preferably weekly)'' and it is this growing confidence and capability which frees ~~childen~~ to engage in Design and Technology activities creatively.		But this is not to say that children are not entitled a regular experience of Design and Technology. Improvement in tool skills, as with any other skill development, requires regular practice ''(preferably weekly)'' and it is this growing confidence and capability which frees children to engage in '''[[Design and Technology]]''' activities creatively.


Line 24:		Line 24:


	Such a display may include a labelled '''Shadow Board''' to indicate what tools are available and where they must be returned to after use. '''Shadow Boards''' may be wall mounted and provision could be made to attach removable '''Resource Boxes'''. These would normally contain commonly used resources and may be replaced or supplemented with other '''Resource Boxes''' which are loaded to match the needs of a particular topic. '''Shadow Boards''' may also be supplemented by other '''Tool Boards''' containing additional tools and equipment which should only be used under direct adult supervision.		Such a display may include a labelled '''Shadow Board''' to indicate what tools are available and to where they must be returned after use. '''Shadow Boards''' may be wall mounted and provision could be made to attach removable '''Resource Boxes'''. These would normally contain commonly used resources and may be replaced or supplemented with other '''Resource Boxes''' which are loaded to match the needs of a particular topic. '''Shadow Boards''' may also be supplemented by other '''Tool Boards''' containing additional tools and equipment which should only be used under direct adult supervision.

DT Online: Added Category

2017-02-02T14:13:18Z

Added Category

← Older revision		Revision as of 14:13, 2 February 2017
Line 61:		Line 61:

	Workbenches for outdoor use are also available. These should be made from treated timber to prevent rotting and '''[[Engineers Vice\|Clamp-on vices]]''' used so they can be stored indoors to prevent their rusting.		Workbenches for outdoor use are also available. These should be made from treated timber to prevent rotting and '''[[Engineers Vice\|Clamp-on vices]]''' used so they can be stored indoors to prevent their rusting.


			[[Category:D&T Resources in Primary Schools]]

DT Online: Created article

2017-02-02T14:11:24Z

Created article

New page

[[File:ChildrenWorking.png|500px|right]]
__TOC__

=====Introduction=====

Primary schools are unlikely to have a specialised room set aside for '''[[Design and Technology]]''' ''(indeed it could be argued that such provision would detract from the use of practical designing and making as a vehicle for [https://en.wikipedia.org/wiki/Active_learning '''Active Learning'''] generally, as and when opportunities arise)''.

But this is not to say that children are not entitled a regular experience of Design and Technology. Improvement in tool skills, as with any other skill development, requires regular practice ''(preferably weekly)'' and it is this growing confidence and capability which frees childen to engage in Design and Technology activities creatively.

It follows that learning through '''[[Design and Technology]]''' should not be a 'special treat' reserved for one-off events with equipment 'hidden away' in storerooms. '''DT Online''' recommends that opportunities should be sought to ensure that children ''(and teachers!)'' are prompted to consider practical learning by having '''[[Design and Technology]]''' resources on open display in each classroom - a designing and making corner perhaps, or at least a section of the classroom wall displays.
[[File:A2-ToolBoardShadow.png|300px|right]]

=====Tool Shadow Board Display=====

A section of wall display can be set aside for '''Design and Technology''' in the smallest primary classroom.

This may accommodate '''D&T Information Boards''', '''D&T Process Boards''' and displays of everyday artefacts relating to the current topic. More permanently, there could be a presentation of the tools, equipment and materials which pupils are able to use if they wish to respond to a topic through practical designing and making.
[[File:A2-ToolBoardLoaded2.png|400px|right]]

Such a display may include a labelled '''Shadow Board''' to indicate what tools are available and where they must be returned to after use. '''Shadow Boards''' may be wall mounted and provision could be made to attach removable '''Resource Boxes'''. These would normally contain commonly used resources and may be replaced or supplemented with other '''Resource Boxes''' which are loaded to match the needs of a particular topic. '''Shadow Boards''' may also be supplemented by other '''Tool Boards''' containing additional tools and equipment which should only be used under direct adult supervision.

<div style="clear: both;"></div>
[[File:PrimaryDTCorner1-A3.png|300px|right]]
=====Single Desk D&T Workspace=====

A single classroom table may be covered with a sheet of '''[[Manufactured Board|Hardboard]]''', or similar, to create a suitable D&T work-surface ''('''[[Manufactured Board|Hardboard]]''' placed reverse side up will also provide a non-slip surface)''. The table may placed under or near the D&T display space or the '''Tool Boards''' and '''Resource Boxes''' located on top of it.

A small clamp-on '''[[Engineers Vice|Vice]]''' can be affixed and this will help secure the '''[[Manufactured Board|Hardboard]]''' top in place ''(children will find a small [[Engineers Vice|vice]] the easiest way to hold strips of wood as it is sawn for example)''.

The table should be located where it can benefit from direct adult supervision and designated as the space where any work involving hazardous equipment must be undertaken ''(e.g. [[Hot Melt Glues|glue-gun]], [[Craft Knife|craft knife]], soldering iron)''

<div style="clear: both;"></div>
[[File:PrimaryDTCorner2.png|400px|right]]
=====Dual Desk D&T Work Area=====

Where space can be found for two tables to be used, this can provide a very effective D&T work area. The two desks can be covered with a single sheet of protective '''[[Manufactured Board|Hardboard]]''', or similar, and should also be located where there can direct adult supervision for work involving hazardous equipment. It should be near to any store, stock room or other storage facility, from where any additional resources can easily be retrieved, as needed, without loss of supervision.

The table may be located near to any wall displays of '''D&T Information Boards''', '''D&T Process Boards''' or displays of everyday artefacts relating to the current topic and the '''Tool Boards''' and a '''Tool Caddy''' or '''Resource Boxes''' located back to back on top of it. '''[[Engineers Vice|Clamp-on Vices]]''' can be affixed to help secure the '''[[Manufactured Board|Hardboard]]''' top and there should be space to position a '''Drill Stand''', held in place with a '''[[G Cramp]]'''

<div style="clear: both;"></div>
[[File:Bench.png|300px|right]]
=====D&T Work Benches=====

Purpose made D&T Workbenches are also available. These are sturdily built and excellent for D&T work at all ages.

A variety of bench tops are available and, optionally, small '''[[Carpenters Vice|Wood Vices]]''' ''(as shown)'' may be added for general use, Small '''[[Engineers Vice|Metal Vices]]''' can be fitted to blocks which are then gripped by the '''[[Carpenters Vice|Wood Vice]]''' and for many operations ''(e.g. using a '''[[Coping Saw]]''')'' these may be preferable.

Workbenches for outdoor use are also available. These should be made from treated timber to prevent rotting and '''[[Engineers Vice|Clamp-on vices]]''' used so they can be stored indoors to prevent their rusting.