Spanners and Wrenches - Revision history

DT Online at 11:21, 20 November 2018

2018-11-20T11:21:14Z

← Older revision		Revision as of 11:21, 20 November 2018
Line 23:		Line 23:


	It is important to use a correct fitting spanner. Excess play may lead the spanner slipping causing personal injury or damage to the nut or bolt. A fixed size spanner would normally therefore be preferred whenever a suitable size is available. [https://en.wikipedia.org/wiki/Adjustable_spanner '''Adjustable Spanners'''] could be used as a ''last resort'' but care must be taken to ensure they are used correctly ~~with~~ the fixed jaw ''~~leading~~'' ~~the rotation - see [https://en.wikipedia.org/wiki/Adjustable_spanner#Proper_use proper use]~~.		[[File:UsingAdjSpanners.png\|200px\|right]]
			It is important to use a correct fitting spanner. Excess play may lead the spanner slipping causing personal injury or damage to the nut or bolt. A fixed size spanner would normally therefore be preferred whenever a suitable size is available. [https://en.wikipedia.org/wiki/Adjustable_spanner '''Adjustable Spanners'''] could be used as a ''last resort'' but care must be taken to ensure they are used correctly such that most pressure is exerted against the fixed jaw as shown opposite when used with a R.H. thread ''(i.e. one that tightens clockwise)''.

DT Online at 09:18, 20 November 2018

2018-11-20T09:18:37Z

← Older revision		Revision as of 09:18, 20 November 2018
Line 20:		Line 20:


	For [https://en.wikipedia.org/wiki/British_Association_screw_threads '''British Association (BA)'''] threads, as used on older electrical equipment, the marked size is the ~~head~~ size - i.e. a 2BA spanner will fit a 2BA nut.		For [https://en.wikipedia.org/wiki/British_Association_screw_threads '''British Association (BA)'''] threads, as used on older electrical equipment, the marked size is the thread size - i.e. a 2BA spanner will fit a 2BA nut.

DT Online at 06:43, 12 August 2017

2017-08-12T06:43:38Z

← Older revision		Revision as of 06:43, 12 August 2017
Line 17:		Line 17:


	Similarly, some older equipment may be fitted with [https://en.wikipedia.org/wiki/British_Standard_Fine '''BSF'''] or [https://en.wikipedia.org/wiki/British_Standard_Whitworth '''BSW'''] nuts and bolts. The spanner sizes of these ~~also is~~ marked with the diameter of the bolt they would fit - e.g. a 1/2" BSW spanner will fit a [https://en.wikipedia.org/wiki/British_Standard_Whitworth '''BSW'''] nut and bolt of 1/2" thread diameter. A further complication is that '''BSW''' spanners will normally also fit a [https://en.wikipedia.org/wiki/British_Standard_Fine '''BSF'''] nut one size larger - e.g. a 1/2" [https://en.wikipedia.org/wiki/British_Standard_Whitworth '''BSW'''] spanner will also fit a '''9/16"''' diameter [https://en.wikipedia.org/wiki/British_Standard_Fine '''BSF'''] nut and bolt.		Similarly, some older equipment may be fitted with [https://en.wikipedia.org/wiki/British_Standard_Fine '''BSF'''] or [https://en.wikipedia.org/wiki/British_Standard_Whitworth '''BSW'''] nuts and bolts. The spanner sizes of these, by contrast, are marked with the diameter of the bolt they would fit - e.g. a 1/2" BSW spanner will fit a [https://en.wikipedia.org/wiki/British_Standard_Whitworth '''BSW'''] nut and bolt of 1/2" thread diameter. A further complication is that '''BSW''' spanners will normally also fit a [https://en.wikipedia.org/wiki/British_Standard_Fine '''BSF'''] nut one size larger - e.g. a 1/2" [https://en.wikipedia.org/wiki/British_Standard_Whitworth '''BSW'''] spanner will also fit a '''9/16"''' diameter [https://en.wikipedia.org/wiki/British_Standard_Fine '''BSF'''] nut and bolt.

DT Online: Added Template

2016-08-25T08:01:00Z

Added Template

← Older revision		Revision as of 08:01, 25 August 2016
Line 1:		Line 1:
	[[File:SpannerNut.png\|~~300px~~\|right]]		[[File:SpannerNut.png\|400px\|right]]
	[https://en.wikipedia.org/wiki/Wrench '''Spanners'''] and [https://en.wikipedia.org/wiki/Wrench '''Wrenches'''] are tools designed to grip screwed together components ''(mainly nuts, bolts and pipe connectors)'' to tighten or loosen them.		__TOC__


			=====Description=====

	~~__TOC__~~		[https://en.wikipedia.org/wiki/Wrench '''Spanners'''] and [https://en.wikipedia.org/wiki/Wrench '''Wrenches'''] are tools designed to grip screwed together components ''(mainly nuts, bolts and pipe connectors)'' to tighten or loosen them.


	=====Spanner Sizes=====		=====Spanner Sizes=====


	[[File:SpannerSizes.png\|300px\|right]]		[[File:SpannerSizes.png\|300px\|right]]
Line 85:		Line 86:
	\| [[File:BasinWrenches.png\|200px\|right]]		\| [[File:BasinWrenches.png\|200px\|right]]
	\|}		\|}

			{{Spanners Buyers Guide}}


	=====Adjustable Spanners and Wrenches=====		=====Adjustable Spanners and Wrenches=====


	{\|		{\|
Line 106:		Line 108:
	See also '''[[Pliers and Cutters\|Multi-Grip Pliers]]''' and '''[[Pliers and Cutters\|Vice-Grip Pliers]]'''		See also '''[[Pliers and Cutters\|Multi-Grip Pliers]]''' and '''[[Pliers and Cutters\|Vice-Grip Pliers]]'''


			{{Wrenches Buyers Guide}}

	[[Category:Levering, Twisting and Turning Tools]]		[[Category:Levering, Twisting and Turning Tools]]

DT Online at 17:17, 20 October 2015

2015-10-20T17:17:08Z

← Older revision		Revision as of 17:17, 20 October 2015
Line 82:		Line 82:
	\|-		\|-
	\| [https://en.wikipedia.org/wiki/Basin_wrench '''Plumbers' Basin Wrench''']		\| [https://en.wikipedia.org/wiki/Basin_wrench '''Plumbers' Basin Wrench''']
	\| Designed for working in confined spaces such as under a sink and used by [https://en.wikipedia.org/wiki/Plumber '''plumbers'''] to tighten tap connections for example. They fit only the one or two sizes used for tap connections and a self-~~tighening~~ version is available.		\| Designed for working in confined spaces such as under a sink and used by [https://en.wikipedia.org/wiki/Plumber '''plumbers'''] to tighten tap connections for example. They fit only the one or two sizes used for tap connections and a self-tightening version is available.
	\| [[File:BasinWrenches.png\|200px\|right]]		\| [[File:BasinWrenches.png\|200px\|right]]
	\|}		\|}

DT Online at 10:37, 16 October 2015

2015-10-16T10:37:15Z

← Older revision		Revision as of 10:37, 16 October 2015
Line 97:		Line 97:
	\|-		\|-
	\| [https://en.wikipedia.org/wiki/Johan_Petter_Johansson '''Pipe Wrench''']		\| [https://en.wikipedia.org/wiki/Johan_Petter_Johansson '''Pipe Wrench''']
	\| These are taken to be '''''adjustables''''' with self-tightening, hardened, and serrated jaws that securely grip soft iron pipe and pipe fittings. They include '''Footprints''' ''(invented by Footprint's founder Thomas R Ellin in 1875)'' and '''Stillsons''' ''(named after the original patent holder's brand name)''.		\| These are taken to be '''''adjustables''''' with self-tightening, often hardened, and serrated jaws that securely grip soft iron pipe and pipe fittings. They include '''Footprints''' ''(invented by Footprint's founder Thomas R Ellin in 1875)'' and '''Stillsons''' ''(named after the original patent holder's brand name)''.
	\| [[File:PipeWrenches.png\|200px\|right]]		\| [[File:PipeWrenches.png\|200px\|right]]
	\|-		\|-

DT Online: Added category link

2015-10-16T06:52:48Z

Added category link

← Older revision		Revision as of 06:52, 16 October 2015
Line 105:		Line 105:
	\|}		\|}
	See also '''[[Pliers and Cutters\|Multi-Grip Pliers]]''' and '''[[Pliers and Cutters\|Vice-Grip Pliers]]'''		See also '''[[Pliers and Cutters\|Multi-Grip Pliers]]''' and '''[[Pliers and Cutters\|Vice-Grip Pliers]]'''


			[[Category:Levering, Twisting and Turning Tools]]

DT Online at 22:22, 15 October 2015

2015-10-15T22:22:01Z

← Older revision		Revision as of 22:22, 15 October 2015
Line 104:		Line 104:
	\| [[File:ChainStrapWrench.png \|200px\|right]]		\| [[File:ChainStrapWrench.png \|200px\|right]]
	\|}		\|}
			See also '''[[Pliers and Cutters\|Multi-Grip Pliers]]''' and '''[[Pliers and Cutters\|Vice-Grip Pliers]]'''

DT Online: Created Article

2015-10-15T22:17:08Z

Created Article

New page

[[File:SpannerNut.png|300px|right]]
[https://en.wikipedia.org/wiki/Wrench '''Spanners'''] and [https://en.wikipedia.org/wiki/Wrench '''Wrenches'''] are tools designed to grip screwed together components ''(mainly nuts, bolts and pipe connectors)'' to tighten or loosen them.

__TOC__

=====Spanner Sizes=====

[[File:SpannerSizes.png|300px|right]]
Modern spanner sizes refer to the ''distance across the flats'' of the hexagonal nut or bolt they would fit. A 17mm spanner therefore fits a nut 17mm across its flats and this is normally a nut to fit a 10mm diameter bolt '''(M10)'''. Also, hexagonal key sizes are given as the distance across their flats and so a M10 Allen Screw for example would need a 8mm key to fit it. A table of common metric spanner and key sizes is shown opposite.

Some spanners may be marked [https://en.wikipedia.org/wiki/Nut_(hardware)#Standard_metric_hex_nuts_sizes '''AF''']. This also means '''Across Flats''' but it is an [https://en.wikipedia.org/wiki/Imperial_units '''Imperial'''] size marking, or more correctly a [https://en.wikipedia.org/wiki/United_States_customary_units#Other_names_for_U.S._customary_units '''SAE'''] marking, associated with [https://en.wikipedia.org/wiki/Unified_Thread_Standard '''UNC'''] and [https://en.wikipedia.org/wiki/Unified_Thread_Standard '''UNF'''] screw threads - e.g. a 1/2" AF spanner is 1/2" across and fits a 5/16" diameter [https://en.wikipedia.org/wiki/Unified_Thread_Standard '''UNF'''] nut.

Similarly, some older equipment may be fitted with [https://en.wikipedia.org/wiki/British_Standard_Fine '''BSF'''] or [https://en.wikipedia.org/wiki/British_Standard_Whitworth '''BSW'''] nuts and bolts. The spanner sizes of these also is marked with the diameter of the bolt they would fit - e.g. a 1/2" BSW spanner will fit a [https://en.wikipedia.org/wiki/British_Standard_Whitworth '''BSW'''] nut and bolt of 1/2" thread diameter. A further complication is that '''BSW''' spanners will normally also fit a [https://en.wikipedia.org/wiki/British_Standard_Fine '''BSF'''] nut one size larger - e.g. a 1/2" [https://en.wikipedia.org/wiki/British_Standard_Whitworth '''BSW'''] spanner will also fit a '''9/16"''' diameter [https://en.wikipedia.org/wiki/British_Standard_Fine '''BSF'''] nut and bolt.

For [https://en.wikipedia.org/wiki/British_Association_screw_threads '''British Association (BA)'''] threads, as used on older electrical equipment, the marked size is the head size - i.e. a 2BA spanner will fit a 2BA nut.

It is important to use a correct fitting spanner. Excess play may lead the spanner slipping causing personal injury or damage to the nut or bolt. A fixed size spanner would normally therefore be preferred whenever a suitable size is available. [https://en.wikipedia.org/wiki/Adjustable_spanner '''Adjustable Spanners'''] could be used as a ''last resort'' but care must be taken to ensure they are used correctly with the fixed jaw ''leading'' the rotation - see [https://en.wikipedia.org/wiki/Adjustable_spanner#Proper_use proper use].

=====Spanner Types=====

{|
|-
| [https://en.wikipedia.org/wiki/Wrench#Types '''Open Ended Spanner''']
| These are one-piece spanners with a U-shaped opening that grips the two opposite faces of a hexagonal bolt or nut. They are usually double-ended, with a different-sized opening at each end slightly angled to allow a greater range of movement in enclosed spaces.
| [[File:OpenEndedSpanner.png |200px|right]]
|-
| [https://en.wikipedia.org/wiki/Wrench#Types '''Ring Spanner''']
| Also a one-piece spanner but with an enclosed opening that grips the faces of the bolt or nut making them less likely to slip - but this also limits their ability to access some nuts and bolts. They are usually double-ended, with a different-sized opening at each end and often with offset handles to improve access to the nut or bolt.
| [[File:RingSpanner.png|200px|right]]
|-
| [https://en.wikipedia.org/wiki/Wrench#Types '''Combination Spanner''']
| A combination spanner usually has an '''Open-ended Spanner''' at one end and a '''Ring Spanner''' of the same size at the other. Other combinations are also available.
| [[File:CombinationSpanner.png|200px|right]]
|-
| '''Socket Set'''
| Sockets are often made from [https://en.wikipedia.org/wiki/Chromium-vanadium_steel '''Chrome Vanadium Steel'''] and can apply much more torque and control than open ended spanners. Sets may contain as few as 10 or 12 different sizes but there can be 100's in the most comprehensive sets. Most sets contain sockets to fit both [https://en.wikipedia.org/wiki/Metric_system '''Metric sizes'''] and also their [https://en.wikipedia.org/wiki/United_States_customary_units#Other_names_for_U.S._customary_units '''SAE'''] equivalents ''(SAE is similar to the UK Imperial sizes and sockets are marked as 1/2", 3/4" etc.)''. Sets usually contain, a [https://en.wikipedia.org/wiki/Socket_wrench '''Ratchet Socket Wrench'''] and may also include: '''Extension Bars''', '''Universal Joint''', '''Spinner Handle''' and '''Adaptors''' if different size drives are used ''(drives are standardised at the SAE sizes of 1/4", 3/8", 1/2", 3/4" - but 1/2" drives are the most common for professional use)''. '''Shallow Sockets''' are the type most commonly found in socket sets but '''Deep Sockets''' are available for specific jobs if needed.
| [[File:Sockets.png|200px|right]]
|}

=====Special Purpose Spanners=====

{|
|-
| [https://en.wikipedia.org/wiki/Torque_wrench '''Torque Wrench''']
| A socket wrench drive tool that is employed to impart a precise amount of torque to a fastener, essential in many cases during the assembly of precision mechanisms or where it is important to ensure a series of threads are tightened evenly ''(e.g. car engine cylinder head screws)''
| [[File:TorqueWrenches.png|200px|right]]
|-
| [https://en.wikipedia.org/wiki/Ratchet_%28device%29 '''Ratchet Spanner''']
| Very useful for undoing nuts or bolts in inaccessible positions when there is a long thread which is too tight to undo with fingers.
| [[File:RatchetSpanner2.png |200px|right]]
|-
| '''Box Spanner'''
| Also called '''Tube Spanners''' and could be regarded as the forerunner of the '''Socket Set''' but they are thinner and longer which makes them still useful to access fixings in a deep or narrow holes for example. They light weight makes them useful in portable tool kits.
| [[File:BoxSpanner2.png|200px|right]]
|-
| [https://en.wikipedia.org/wiki/Hex_key '''Allen Keys''']
| Used to turn screw or bolt heads designed with a hexagonal socket, they are commonly available as a simple L-shaped length of hexagonal wire stock but there are also versions with plastic T-shaped handles.
| [[File:AllenKeys.png|200px|right]]
|-
| '''Magneto Spanner'''
| Set of small pocket spanners were produced for the motorcyclist to repair their bike out on the road. They were usually in B.A. sizes and often included a '''Feeler Gauge''' to set ignition points.
| [[File:MagnetoSpanners.png |200px|right]]
|-
| ''''C' Spanner''' and '''Pin Spanner'''
| Wrenches with one or several pins or hooks, designed to drive threaded collars and retainer rings etc.
| [[File:CPinSpanners.png|200px|right]]
|-
| [https://en.wikipedia.org/wiki/Bicycle_tools '''Bike Spanner''']
| Such spanners, stamped out of sheet, are cheap to produce and so tend to come as accessories supplied with a product.
| [[File:BikeSpanner.png|200px|right]]
|-
| [https://en.wikipedia.org/wiki/Basin_wrench '''Plumbers' Basin Wrench''']
| Designed for working in confined spaces such as under a sink and used by [https://en.wikipedia.org/wiki/Plumber '''plumbers'''] to tighten tap connections for example. They fit only the one or two sizes used for tap connections and a self-tighening version is available.
| [[File:BasinWrenches.png|200px|right]]
|}

=====Adjustable Spanners and Wrenches=====

{|
|-
| [https://en.wikipedia.org/wiki/Adjustable_spanner '''Adjustable Spanner''']
| Included here are those '''''adjustables''''' with jaws that remain parallel and are mainly therefore intended for use with nuts and bolts. The jaws of most modern ''adjustables'' are set at an a angle relative to the tool's handle to facilitate use in close quarters but not so on the older [https://en.wikipedia.org/wiki/Monkey_wrench '''Monkey Wrench''']. The modern Adjustable Spanner was patented by [https://en.wikipedia.org/wiki/Johan_Petter_Johansson '''Johan Petter Johansson'''] in 1891.
| [[File:AdjustableSpanners.png|200px|right]]
|-
| [https://en.wikipedia.org/wiki/Johan_Petter_Johansson '''Pipe Wrench''']
| These are taken to be '''''adjustables''''' with self-tightening, hardened, and serrated jaws that securely grip soft iron pipe and pipe fittings. They include '''Footprints''' ''(invented by Footprint's founder Thomas R Ellin in 1875)'' and '''Stillsons''' ''(named after the original patent holder's brand name)''.
| [[File:PipeWrenches.png|200px|right]]
|-
| [https://en.wikipedia.org/wiki/Strap_wrench '''Chain Wrench or Strap Wrench''']
| A self-tightening wrench with either a chain or strap of metal, leather, or rubber attached to a handle, used to grip and turn smooth cylindrical objects ''(such as car engine oil filters)''. Strap Wrenches rely on [https://en.wikipedia.org/wiki/Friction '''Friction'''] to grip smooth objects : Chain Wrenches can also positively grip '''[[Chain and Sprocket|Sprockets]]'''.
| [[File:ChainStrapWrench.png |200px|right]]
|}