Hollowing Block: Difference between revisions
From DT Online
(Created article) |
mNo edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 11: | Line 11: | ||
'''Hollowing Blocks''' are often self-made as required but can also be purchased. | '''Hollowing Blocks''' are often self-made as required but can also be purchased. | ||
A similar block when '''[[:Category:Blacksmithing|Blacksmithing]]''' for example, can be made by placing a short length of suitable diameter steel tubing over an inverted convex punch ''(e.g. a '''[[:Category:Stakes|Stake]]''' perhaps)'', and pouring in molten [https://en.wikipedia.org/wiki/Lead '''Lead'''] to create the block. | |||
Latest revision as of 11:50, 11 May 2017
Description
Hollowing Blocks can be made by carving or turning concave depressions into end grain of a suitable close-grained Hardwood to create a hollow into which sheet metal can be formed with a Bossing Mallet or Blocking Hammer for example.
Features and Uses
Hollowing Blocks are often self-made as required but can also be purchased.
A similar block when Blacksmithing for example, can be made by placing a short length of suitable diameter steel tubing over an inverted convex punch (e.g. a Stake perhaps), and pouring in molten Lead to create the block.
 
|
|
|
|
|
|
|
| Jewellers Leather Sandbag
|
Bossing Mallet
|
Rawhide Mallet
|
Jewellers Hammers
|
Repoussé and Chasing Punches
|
Panel Beating Tools Set
|
Doming Block and Punches
|