BossingMallet.png: Difference between revisions
From DT Online
(Added Template) |
mNo edit summary |
||
| Line 2: | Line 2: | ||
[[Category:Striking and Punching Tools]] | [[Category:Striking and Punching Tools]] | ||
[[Category:Beaten Metalwork]] | |||
Latest revision as of 10:54, 19 April 2017
- Traditional Boxwood Mallets are now largely superceded by Nylon, PVC or rubber faced hammers and mallets for general work. They are available in a range of diameters and weights.
- Carpenters' Mallets with a head size of 4-5 inches (100mm - 125mm) are a suitable size for most work in Design and Technology.
- Carving Mallet heads are commonly made from Beech but Lignum Vitea heads are considered better because they are heavier. They may now be hard to find. A modern alternative is to use Polyurethane for the heads (Bronze or Brass also used). A good general size head weight for light work would be approximately 450 grams or less, and for general work, 800 grams is more suitable.
- Bossing Mallets are sized by head diameter (35, 50, 60, or 75mm). The smaller sizes are used for art metalwork and the larger sizes are for shaping and stretching sheet metal and soft roofing materials such as lead.
 
|
|
|
|
|
| Nylon Hammer
|
Rubber Mallet
|
Carpenters Mallet
|
Carvers Mallet
|
Rawhide Mallet
|
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 08:34, 14 August 2015 |  | 582 × 582 (32 KB) | DT Online (talk | contribs) | Bossing Mallet |
You cannot overwrite this file.
File usage
The following page uses this file:
