Scroll Saw

Scroll Saws are a powered Fretsaw and often chosen for fret work, Piercing Saw work (if a metal cutting blade is fitted) or as an alternative to a Coping saw.

Blades are normally clamped in place such that the saw cuts on the downstroke, pulling the workpiece against the table.

---

Safety Point! All machinery can be hazardous and fingers can come into contact with the blade - these oscillate so tend to vibrate soft materials rather than cut them however. Eye protection should be worn and care taken to avoid inhaling any dust.

---

Note: To cut internal shapes, small holes are first drilled in the material through which to thread the blade