Electric Motor: Difference between revisions
From DT Online
mNo edit summary |
(Added Template) |
||
| Line 1: | Line 1: | ||
[[File:DCElectricMotor.jpg| | [[File:DCElectricMotor.jpg|300px|right]] | ||
__TOC__ | |||
=====Description===== | |||
[http://en.wikipedia.org/wiki/Electric_motor '''Electric motors'''] are devices for changing electrical energy into rotational movement. The turning power or torque of a motor can vary greatly. Generally speaking small motors have low torque whereas large motors usually have a high torque rating. | [http://en.wikipedia.org/wiki/Electric_motor '''Electric motors'''] are devices for changing electrical energy into rotational movement. The turning power or torque of a motor can vary greatly. Generally speaking small motors have low torque whereas large motors usually have a high torque rating. | ||
Motors come in [http://en.wikipedia.org/wiki/Alternating_current '''alternating current ''( | =====Features and Applications===== | ||
Motors come in [http://en.wikipedia.org/wiki/Alternating_current '''alternating current ''(AC)'''''] and [http://en.wikipedia.org/wiki/Direct_current '''direct current ''(DC)'''''] versions, DC types of between 3 - 12 volts being most suitable for general use. The current direction controls the direction of rotation for DC motors. | |||
It is usually necessary to ''‘gear down’'' a motor as their speed of rotation ''(typically 2400rpm)'' is too great. This can be achieved either mechanically or electronically. | |||
[https://en.wikipedia.org/wiki/DC_motor '''DC Motors'''] have the advantage of being relatively inexpensive and can be obtained in high torque versions which are most suitable for driving models. The motor's speed can be controlled over a wide range ''(e.g. using a variable supply voltage)'' | |||
[https://en.wikipedia.org/wiki/Stepper_motor '''Stepper Motors'''] respond to electrical pulses sent from an external '''Driver Circuit''' or via computer or micro-processor control. Each pulse causes the motor to rotate by a single increment ''(or Step)'' and then lock in that position. The process can be repeated and a continuous stream of pulses will result in full rotations but the motors are used mainly to turn by a precise angle. | |||
{{Electric Motor Buyers Guide}} | |||
[[Category:Primary]] | [[Category:Primary]] | ||
[[Category:Secondary]] | [[Category:Secondary]] | ||
[[Category:Electronics Components]] | [[Category:Electronics Components]] | ||
Revision as of 20:00, 2 July 2016
Description
Electric motors are devices for changing electrical energy into rotational movement. The turning power or torque of a motor can vary greatly. Generally speaking small motors have low torque whereas large motors usually have a high torque rating.
Features and Applications
Motors come in alternating current (AC) and direct current (DC) versions, DC types of between 3 - 12 volts being most suitable for general use. The current direction controls the direction of rotation for DC motors.
It is usually necessary to ‘gear down’ a motor as their speed of rotation (typically 2400rpm) is too great. This can be achieved either mechanically or electronically.
DC Motors have the advantage of being relatively inexpensive and can be obtained in high torque versions which are most suitable for driving models. The motor's speed can be controlled over a wide range (e.g. using a variable supply voltage)
Stepper Motors respond to electrical pulses sent from an external Driver Circuit or via computer or micro-processor control. Each pulse causes the motor to rotate by a single increment (or Step) and then lock in that position. The process can be repeated and a continuous stream of pulses will result in full rotations but the motors are used mainly to turn by a precise angle.
