Coping Saw: Difference between revisions
From DT Online
(Add framesaw link) |
m (Embolden Bowsaw) |
||
| Line 2: | Line 2: | ||
'''[http://en.wikipedia.org/wiki/Coping_saw Coping Saws]''' are a type of '''[[framesaw]]''' used to cut shapes out of timber and plastics for example. The saw is so called because of its use in ''''[https://en.wikipedia.org/wiki/Coping_%28joinery%29 coping]'''' or ''''[https://en.wikipedia.org/wiki/Coping_%28joinery%29 scribing]'''' the end of a length of moulding to make it fit against another. | '''[http://en.wikipedia.org/wiki/Coping_saw Coping Saws]''' are a type of '''[[framesaw]]''' used to cut shapes out of timber and plastics for example. The saw is so called because of its use in ''''[https://en.wikipedia.org/wiki/Coping_%28joinery%29 coping]'''' or ''''[https://en.wikipedia.org/wiki/Coping_%28joinery%29 scribing]'''' the end of a length of moulding to make it fit against another. | ||
They are most easily used by gripping the handle with both hands, as with a Bowsaw, and holding the work as shown. If used as shown the blade should face forwards and can be rotated to suit the work in hand. | They are most easily used by gripping the handle with both hands, as with a '''Bowsaw''', and holding the work as shown. If used as shown the blade should face forwards and can be rotated to suit the work in hand. | ||
Fine teeth blades are held by pegs and tensioned within a frame by tightening the handle. | Fine teeth blades are held by pegs and tensioned within a frame by tightening the handle. | ||
Revision as of 10:26, 17 October 2014
Coping Saws are a type of framesaw used to cut shapes out of timber and plastics for example. The saw is so called because of its use in 'coping' or 'scribing' the end of a length of moulding to make it fit against another.
They are most easily used by gripping the handle with both hands, as with a Bowsaw, and holding the work as shown. If used as shown the blade should face forwards and can be rotated to suit the work in hand.
Fine teeth blades are held by pegs and tensioned within a frame by tightening the handle.
Note: To cut internal shapes, small holes are first drilled in the material through which to thread the blade.