Rack and Pinion

Description

The Rack and Pinion gear is used to convert between rotary and linear motion. Often the pinion rotates in a fixed position and the rack is free to move - this arrangement is used in the steering mechanism of most cars.

Features and Applications

Alternatively, the rack may be fixed and the pinion rotates moving up and down the rack. This latter arrangement is used as the drive mechanism for Funicular Railways (steep railways up the side of hills).

DT Online Buyers' Guide

Gears, whether of the same size or different diameters, will only Mesh together if the size of the teeth are the same. The size of Gear Teeth is measured along the circumference of an imaginery Pitch Circle but is more easily calculated by dividing the diameter of the Pitch Circle by the number of gear teeth. The Gear Teeth size is known as the Modulus or Module (m) and it must be the same for any meshing gears. Always check this before purchase - contact supplier if not stated.

Load video YouTube YouTube might collect personal data. Privacy Policy ContinueDismiss Click top left to enlarge

Engino STEM Gears and Worm Drives Set	Meccano Moving Parts	K'Nex Intro to Simple Machines	Assorted Plastic Gears	Gears, Pulleys and Rack Set	Gears and Gear Cutting (Workshop Practice)	Steampunk Cyberpunk Watch Parts Vintage Gears