Bossing Mallet

Description

Bossing Mallets have 'egg-shaped' heads traditionally made from a split-resistant hardwood (e.g. Boxwood, or Lignum Vitea) but now more commonly made from Polyethylene or Nylon. They have resilient, shock absorbing handles made from Cane or hardwood such as Ash or Hickory.

Features and Uses

Used in conjunction with a Sandbag or wooden formers when Hollowing shapes in sheet metal (e.g. to make a copper bowl).

DT Online Buyers' Guide

• Traditional Boxwood Mallets are now largely superceded by Nylon, PVC or rubber faced hammers and mallets for general work. They are available in a range of diameters and weights.
• Carpenters' Mallets with a head size of 4-5 inches (100mm - 125mm) are a suitable size for most work in Design and Technology.
• Carving Mallet heads are commonly made from Beech but Lignum Vitea heads are considered better because they are heavier. They may now be hard to find. A modern alternative is to use Polyurethane for the heads (Bronze or Brass also used). A good general size head weight for light work would be approximately 450 grams or less, and for general work, 800 grams is more suitable.
• Bossing Mallets are sized by head diameter (35, 50, 60, or 75mm). The smaller sizes are used for art metalwork and the larger sizes are for shaping and stretching sheet metal and soft roofing materials such as lead.

Nylon Hammer	Rubber Mallet	Carpenters Mallet	Carvers Mallet	Rawhide Mallet