Transistor

Transistors are used as electronic switches and current amplifiers. They have three ‘legs’ - base , collector and emitter. A small current to the base switches on the transistor allowing a much larger current to flow between collector and emitter.

The current gain of a transistor (hFE) is the ratio of the current flowing through the collector, to the current flowing through the base. It is a measure of the transistor's ability to amplify current (hFE = Ic/Ib).

They come in various different shapes and sizes and it is important to decide which type is required at the outset. Factors to be considered are voltage and power handling capacities, cost and availability.

Transistor Types

Transistors come in NPN and PNP types. It is important to use the correct type when designing and building circuits.

NPN transistors are most commonly used in schools for control circuits. The Base and Collector need to be positive with respect to the Emitter and a base voltage of at least 0.6V with respect to the emitter to ‘turn on’ (Darlington Pair transistors require 1.2 V). A limiting resistor - typically 1K is required in the base circuit of the transistor stage to prevent over-running and hence overheating and destruction of the transistor.

PNP transistors need the Collector and Base to be negative with respect to the Emitter and ‘turn on’ when the base current falls below 0.6V with respect to the emitter.

Transistor Formulae

The current gain of a transistor (hFE) is the ratio of the current flowing through the collector, to the current flowing through the base. It is a measure of the transistor's ability to amplify current.

History and Development

Transistors were developed as the result of some work at the Bell Telephone Labs. in 1948 by a team comprising William Shockley, John Bardeen and Walter Houser - in 1956 the team were jointly awarded a Nobel Prize in Physics for this work.

The main material, silicon, can be made into a conductor by doping: a process of adding impurities to the silicon crystal. Adding phosphorus or arsenic creates N-type Silicon (negatively charged) whereas adding boron or gallium produces P-type Silicon (positively charged).

Combining layers of the two types of silicon side by side produces a Diode. The transistor is essentially a Triode built up from a thin central layer of one type of silicon semiconductor sandwiched between two thicker pieces of the other type - i.e. either NPN or PNP.