Milling Machine

Horizontal and Vertical Milling Machines

Labelled parts of Milling Machines

A milling machine is a machine tool used for the shaping of metal and other solid materials. Milling machines exist in two basic forms: Horizontal Milling Machines and Vertical Milling Machines.

The direction which the workpiece is fed into the milling cutter determines whether it is a conventional milling operation or climb milling. In conventional milling the work is fed in a direction opposite to the tool rotation. The tool starts to cut at the bottom of a revolution and is pushing against the feed. In climb milling the tool starts to cut at the top of each revolution and tends to pull the work through the machine. Climb milling requires less power and produces a better finish but can lead to serious damage if there is too much backlash. For this reason climb milling should only be done on manual machines fitted wth backlash eliminators or CNC machines which, by their nature, should be free of any backlash.

With the advent of computer numerical control (CNC), milling machines have evolved into machining centres (milling machines with automatic tool changers, tool magazines or carousels, CNC control, coolant systems, and enclosures), and are generally classified as vertical machining centres (VMCs) and horizontal machining centres (HMCs). VMC's are now the most commonly used in schools.

Milling Cutters are available in a wide variety of shapes and range of sizes as shown below. Several can be grouped together along the arbor of a horizontal milling machine to accomplish a Gang Milling operation in which a whole profile may be machined in a single pass.

Slab Milling	Also known as Plain Milling, these cutters are designed to remove large amounts of material either for a very wide slot or just to level a surface. They are available in a range of diameters and widths.
Side and Face Cutter	These cutters have cutting edges round the circumference and also on the sides of the teeth. They can be used for cutting shoulders and slots. They are available in a range of diameters and widths.
Slitting Saw	This is the basic tool for cutting grooves and slots. They are available in a range of diameters and thicknesses. Slitting saw teeth can have chamfers and radii put on them to cut different shapes.
Angle Milling	Single Angle Cutters are used to cut a specified angle, e.g. for a chamfer or bevel, and only cut on one side of the angle. Double Angle Cutters are also available to cut grooves with a specific included angle. They cut on both sides of the angle and the teeth of come to point with a small radius on the tip. Similar tasks can be accomplished by use of Chamfer Cutters which are gripped by their shank rather than an arbor.
End Milling	Available in a large variety of shapes, styles, and range of diameters, End Mills can side mill, plunge cut and be center cutting - they can be thought of as the equivalent of router but for cutting metal instead of wood. Rough Cut End Mills are available for rapid metal removal and Slot Drills are used to producing pockets, as a keyway for example, without drilling a hole before hand.
Face Milling	These are large milling cutters designed for heavy cutting that are meant to remove large amounts of material. They are available in a range of diameters and types of carbide inserts.
T-Slot Cutters	These are used to make a pre-cut slot or groove into a Tee Slot. Machine tables often have Tee Slots in which mounting bolts can be located.
Milling a Dovetail Slide	Dovetails are shank tools that are used to cut specific angles into the sides of pe-cut slots to create Dovetail Slides - as commonly used on a Lathe Cross-slide for example. The mating half of the slide would be made using an Angle or Chamfer Cutter. Note: The two parts of a Dovetail Slide are made oversize and adjustable packing slips used to produce an accurate sliding fit.
Milling a Woodruff Keyway	Typically, these are smaller milling cutters with a shank although they can be in excess of 150mm in diameter. Woodruff Keys are small semi-circular shaped pieces of metal which locate in such seatings, leaving a small amount protruding on to which a keyway in a pulley or gear, for example, can be located such that they rotate with the shaft.