Actions

Tinman's Anvil

From DT Online

TinmansAnvil2.jpg
Description

A Tinsman's Anvils are conveniently small surfaces which can be used generally when working sheet metal.


They can be held in a Vice, Bench Socket or the Hardie Hole of the larger Blacksmith's Anvil.


DT Online Buyers' Guide
  • Traditional Boxwood Mallets are now largely superceded by Nylon, PVC or rubber faced hammers and mallets for general work. They are available in a range of diameters and weights.
  • Carpenters' Mallets with a head size of 4-5 inches (100mm - 125mm) are a suitable size for most work in Design and Technology.
  • Carving Mallet heads are commonly made from Beech but Lignum Vitea heads are considered better because they are heavier. They may now be hard to find. A modern alternative is to use Polyurethane for the heads (Bronze or Brass also used). A good general size head weight for light work would be approximately 450 grams or less, and for general work, 800 grams is more suitable.
  • Bossing Mallets are sized by head diameter (35, 50, 60, or 75mm). The smaller sizes are used for art metalwork and the larger sizes are for shaping and stretching sheet metal and soft roofing materials such as lead.
Nylon Hammer Rubber Mallet Carpenters Mallet Carvers Mallet Rawhide Mallet
Nylon Hammer Rubber Mallet Carpenters Mallet Carvers Mallet Rawhide Mallet