Timber: Difference between revisions
From DT Online
(Created Category) |
No edit summary |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
[[File:Geograph-136284-by-Richard-Young.jpg|300px|right]] | [[File:Geograph-136284-by-Richard-Young.jpg|300px|right]] | ||
[https://en.wikipedia.org/wiki/Lumber '''Timber'''] is wood from trees that have been [https://en.wikipedia.org/wiki/ | [https://en.wikipedia.org/wiki/Lumber '''Timber'''] is wood from trees that have been [https://en.wikipedia.org/wiki/Felling '''Felled'''], '''[[Timber Conversion|Converted]]''' into boards and '''[[Seasoning|Seasoned]]''' to less than 20% moisture content to produce the most sustainable building material. | ||
'''Timber''' is sawn into standard sizes and graded according to its strength, appearance, number of defects etc.. Grading is done to conform to British and European Standards both visually and by machine. Strength classes range from C14 to C50 for softwood and D30 to D70 for hardwoods. The higher the number, the stronger the timber. The most common softwood grade for general joinery work is C16. | |||
Structural softwoods are available in basic lengths between 1.8m and 7.2m and measured in increments of 300mm. Standard cross sections of sawn softwood are between 75 and 300mm in width and between 22 and 300mm in thickness. Timber which is subsequently planed will commonly have these sizes reduced by 3mm for sections of 150mm or below, or 5mm for larger sections. | |||
---- | |||
[[Category:Materials and Components]] | [[Category:Materials and Components]] | ||
Latest revision as of 23:09, 4 January 2018
Timber is wood from trees that have been Felled, Converted into boards and Seasoned to less than 20% moisture content to produce the most sustainable building material.
Timber is sawn into standard sizes and graded according to its strength, appearance, number of defects etc.. Grading is done to conform to British and European Standards both visually and by machine. Strength classes range from C14 to C50 for softwood and D30 to D70 for hardwoods. The higher the number, the stronger the timber. The most common softwood grade for general joinery work is C16.
Structural softwoods are available in basic lengths between 1.8m and 7.2m and measured in increments of 300mm. Standard cross sections of sawn softwood are between 75 and 300mm in width and between 22 and 300mm in thickness. Timber which is subsequently planed will commonly have these sizes reduced by 3mm for sections of 150mm or below, or 5mm for larger sections.
Pages in category 'Timber'
The following 12 pages are in this category, out of 12 total.
Media in category 'Timber'
The following 25 files are in this category, out of 25 total.
BuiidersApp.jpg 160 × 160; 7 KB
DeathWatchBeetle.png 331 × 237; 151 KB
DefectsLabelled.png 280 × 352; 62 KB
FurnitureBeetle.png 319 × 212; 81 KB
GangSaw.png 848 × 877; 318 KB
Geograph-136284-by-Richard-Young.jpg 640 × 480; 116 KB
HardwoodLip.png 861 × 323; 289 KB
HeartSide.png 587 × 258; 53 KB
HouseLonghornBeetle.png 394 × 212; 167 KB
KnottyPine.jpg 281 × 180; 7 KB
LyctusBeetle.png 402 × 187; 101 KB
ManufacturedBoards2.png 689 × 500; 85 KB
MedullaryRays.png 300 × 152; 62 KB
MoistureContentFormula.png 755 × 50; 11 KB
PlainQuarterRiftsawnDifferenceDiagram.png 500 × 585; 271 KB
PlainSawn.png 500 × 423; 258 KB
QuarterSawn.png 500 × 545; 368 KB
RiftSawn.png 500 × 490; 306 KB
SawnTimber.png 800 × 375; 285 KB
ShakesChecks.png 200 × 252; 70 KB
TimberDefects.png 500 × 345; 214 KB
TimberStackLabelled.png 648 × 557; 433 KB
TreeSectionLabelled.png 726 × 521; 397 KB
VitruviusBoxedHeart.png 500 × 518; 406 KB
WetRot.jpg 404 × 264; 86 KB
