Actions

Wet or Dry Paper: Difference between revisions

From DT Online

m (Added Template)
m (Added category links)
Line 14: Line 14:




{{Secondary Tools and Equipment}}
[[Category:Primary]]
[[Category:Secondary]]
[[Category:Tools and Equipment]]

Revision as of 18:11, 29 April 2015

WetDryPaper.jpg

Silicon Carbide, or Wet and Dry, paper is available in a very wide range of grit sizes - eg up to 3000. Use wet 40 to 600 grit for general finishing of metals and plastics and 1000 and above for cutting back between coats of spray paint.



Note: Using Wet and Dry Paper wet will prolong its life and makes for a better finish. Adding a drop of washing-up liquid to the bowl of water being used will also help lubricate the paper.



Wrap around strips of wood when finishing edges of plastics and clip to a sanding block when finishing large surfaces, e.g. when rubbing down sprayed painted panels between coats, and alternate the direction to remove scratches.

Sheets of Wet and Dry paper can be fixed to waterproof ply to make graded sanding boards for finishing edges and small pieces of work - e.g. 120 grit, 240 grit and 400 grit.