Knock Down Fittings, Brackets and Plates

Flat Pack, Ready to Assemble(RTA) or Knock Down(KD) Furniture is commonly constructed from sheets of Particle Board which are Butt Jointed together and held in place by a variety of mechanical fittings - known generally as Knock Down or KD Fittings.

Screw and bolt type KD Fittings, which pull the joint together, are often supplemented by use of dowels to provide added location.

In addition, various brackets and braces are also used to strengthen or protect edges and corners of other products, especially those made from thin sheet materials, and repair plates are available, which are shaped and drilled to reinforce loose joints by being screwed across them.

Connecting Blocks	Made from Polyethylene and commonly available in dark brown or white, these are used for joining sheet materials and attaching kitchen units to the underside of the worktop for example. They are also known as ‘Modesty Blocks’ because In the 1960's, when open plan offices became popular, they were used to add a panel between desk pedestals. Two-part blocks bolt together and so enable dismantling.
Furniture Connector Nuts and Bolts	Typical applications include cabinets, chairs, desks, shop equipment and tables. Furniture Connector Bolts are for use with Joint Connector Nuts or Cross Dowels. They are designed for use with self-assembly furniture, and are easily applied with an Allen key.
Cross Dowels	Also known as 'Barrel Nuts' these are designed for use with Joint Connector Bolts where a right angle connection is needed.
CamLock Fitting	Cam and Dowel fittings are commonly used to assemble flat pack furniture and kitchen cabinets. Cam and Dowel parts are used to pull together standard thickness board panels to give a hidden fixing.
Furniture Connector Screws	Also known as ‘Confirmat Screws’ these are used for easy assembly and dismantling of carcase sections, especially in Particle Board. The deep cutting thread helps to ensure accurate and close-fitting joints.
Cabinet Connector Screw	Similar to Furniture Connector Nuts and Bolts but with a capacity limited to 30mm-39mm, these are commonly used to join flat pack Kitchen Units, Wardrobes, or Cupboards together. They are usually set into the front row of unused shelf peg holes and when tightened, keep units in line and spread any uneven load.
Worktop Connector Bolts	Designed to provide a strong neat join between kitchen worktops going round an internal corner for example. The nut is tightened onto the bolt pressing the caps against the walls of 35 mm diameter 'blind' holes drilled into the underside. This pulls the two worktop sections tightly together
Angle Brackets	For light duty applications, these can be used to secure worktops, and kitchen units to walls, for theatre set building or to repair broken items of furniture.
Shrinkage Brackets and Plates	These have elongated mounting slots to allow for movement between the two pieces being fixed - typically in between a solid wood table top and its frame to allow for shrinkage due to different atmospheric conditions.
Repair Plates	Available in various shapes to enable quick and easy repair of general household items or to reinforce simple frame constructions.
Angle and Corner Braces	These can be used to reinforce angles and corners of products made from thin sheet materials.
Box Corners	Also known as ‘Suitcase Corners’, these are available in a range of finishes, including either pressed or cast in brass, and both plain or decorative, to protect corners and make a simple wood box into something quite exceptional for example.
Escutcheon	This term derives from an old French word for shield and is most commonly used to describe the plate or insert surrounding keyholes in doors, cabinets, desk drawers or chests.
Mirror Plates	These screw to the back of a picture frame or mirror frame to provide a means of hanging them on to a wall. They can also be used for hanging bookshelf units and other cabinets for example.