CskBits.png: Difference between revisions

Latest revision as of 10:38, 15 May 2016

For most non-critical work in Design and Technology, countersinking can be achieved using a Twist Drill twice the diameter of the hole in question.
Combined Countersink, Pilot Drill and Counterbore drills can greatly speed up assembly work in wood.
For more precise work, purpose made Countersink Bits are available.
Choose High Speed Steel if countersinking steel since ordinary Carbon Steel is suitable only for wood and plastics.


Draper Hand Countersink Bit	Countersinking Drills	Combined Countersink, Pilot Drill and Counterbore drills

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	20:26, 29 October 2015		404 × 394 (28 KB)	DT Online (talk \| contribs)	Countersink Bits

You cannot overwrite this file.

There are no pages that use this file.

This file contains additional information, probably added from the digital camera or scanner used to create or digitise it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Horizontal resolution	37.79 dpc
Vertical resolution	37.79 dpc

Revision as of 21:11, 25 October 2015 (view source) DT Online (talk \| contribs) (Countersinking BIts)		Latest revision as of 10:38, 15 May 2016 (view source) DT Online (talk \| contribs) (Added Template)
(2 intermediate revisions by the same user not shown)
Line 1:		Line 1:
	~~Countersinking BIts~~		{{Countersink Bits Buyers Guide}}

			[[Category:Drilling and Boring]]