Router: Difference between revisions
From DT Online
(Added Router Table) |
m (Added links) |
||
| Line 20: | Line 20: | ||
=====Router Templates and Guides===== | =====Router Templates and Guides===== | ||
[[File:RouterTemplates.png|300px|right]] | [[File:RouterTemplates.png|300px|right]] | ||
'''Routers''' can be guided freely by hand but are best used if guided against a '''Fence''' or guide bar of some kind. For more complex cuts, simple ''' | '''Routers''' can be guided freely by hand but are best used if guided against a '''Fence''' or guide bar of some kind. For more complex cuts, a simple '''[[Template]]''' can be cut out of 6mm sheet MDF for example and the '''Router''' guided around the inside or outside of the shape. | ||
To prevent the revolving cutter rubbing against the '''Template''', some cutters are produced with a bearing around the top of the '''Shank''' but '''Guide Bushes''' are also available. | To prevent the revolving cutter rubbing against the '''[[Template]]''', some cutters are produced with a bearing around the top of the '''Shank''' but '''Guide Bushes''' are also available. | ||
In essence these provide a short tube ''(or bush)'' which is fixed to the underside of the '''Router''' baseplate and shrouds the top of the cutter. The size of a '''Template''' needs to be adjusted to accommodate the size of the '''Guide Bush'''. | In essence these provide a short tube ''(or bush)'' which is fixed to the underside of the '''Router''' baseplate and shrouds the top of the cutter. The size of a '''[[Template]]''' needs to be adjusted to accommodate the size of the '''Guide Bush'''. | ||
---- | ---- | ||
| Line 42: | Line 42: | ||
=====Dovetail Jig===== | =====Dovetail Jig===== | ||
[[File:DovetailJig.png|300px|right]] | [[File:DovetailJig.png|300px|right]] | ||
Dovetail Jigs enable the two pieces of timber making the joint to be clamped together with a '''Template''' comprising a series of equally spaced guide slots. A '''Router''' equipped with a '''Dovetail Cutter''' is simply passed along each slot in turn to cut both halves of the eventual '''Lap Dovetail''' joint. | Dovetail Jigs enable the two pieces of timber making the joint to be clamped together with a '''[[Template]]''' comprising a series of equally spaced guide slots. A '''Router''' equipped with a '''Dovetail Cutter''' is simply passed along each slot in turn to cut both halves of the eventual '''[[Lap Dovetail]]''' joint. | ||
| Line 50: | Line 50: | ||
If the '''Dovetail Cutter''' is replaced by a straight '''Router Cutter''', the same | If the '''Dovetail Cutter''' is replaced by a straight '''Router Cutter''', the same '''[[Jig]]''' can be used to produce '''[[Comb Joints]]'''. | ||
Revision as of 19:43, 7 February 2016
Portable Routers are used to produce recesses in the surface of materials (usually timber or plastics) or to finish edges of boards. Originally a hand tool, modern portable powered Routers may be regarded as the woodworker's version of a Milling Machine and CNC Routers are available.
Most models are Plunge Routers in that the cutter can be lowered into the work-piece and then locked to the required cutting depth. Router Bits can be made of High Speed Steel (HSS) but Tungsten Carbide Tipped (TCT) tools last longer and are preferred.
Router Bits are available in a wide variety of shapes to create different edge profiles.
Some Router Bits appear similar to End Mills but their cutting action is different and they operate at higher cutting speeds.
Safety Point! All high-speed woodcutting machinery is dangerous and Routers must only be used by trained adults or trainees under direct supervision.
Router Templates and Guides
Routers can be guided freely by hand but are best used if guided against a Fence or guide bar of some kind. For more complex cuts, a simple Template can be cut out of 6mm sheet MDF for example and the Router guided around the inside or outside of the shape.
To prevent the revolving cutter rubbing against the Template, some cutters are produced with a bearing around the top of the Shank but Guide Bushes are also available.
In essence these provide a short tube (or bush) which is fixed to the underside of the Router baseplate and shrouds the top of the cutter. The size of a Template needs to be adjusted to accommodate the size of the Guide Bush.
Slot Cutter
Routers can be fitted with a cutter designed to cut the slots or grooves required to accept Joining Biscuits. The cutters typically are 40mm diameter and 4mmm wide and often come equipped with a choice of spacer bearings which fit over the shank and rub against the work surface to control cutting depth.
The Slots cut using a Router do not match the shape of a biscuit as accurately as those cut using a Biscuit Jointer but they are quite adequate for most purposes.
Dovetail Jig
Dovetail Jigs enable the two pieces of timber making the joint to be clamped together with a Template comprising a series of equally spaced guide slots. A Router equipped with a Dovetail Cutter is simply passed along each slot in turn to cut both halves of the eventual Lap Dovetail joint.
Note:
Dovetail Jigs produce Lap Dovetails which are easily identified by their rounded edges on one side of the tails and the bottom of the pins. They are also equi-spaced, whereas through Dovetails are hand-cut and often distinguished by their wide tails and narrow pins.
If the Dovetail Cutter is replaced by a straight Router Cutter, the same Jig can be used to produce Comb Joints.
Router Table
Routers can be mounted upside down using a Router Table to create a small moulding machine.
The revolving cutter is this exposed above the table and the work pushed against a fence. It is essential the cutter is adequately guarded and great care needs to be taken in its use.
Safety Point!
BS 4163 states : "Students may only use the following machines where they have been assessed and the assessment shows that they are competent, and under appropriate supervision of specifically trained staff:"
and also:
Portable routers many only be used inverted if fitted in a proprietary routing table specifically designed for the machine and guarded appropriately;"