Jointing Biscuit: Difference between revisions
From DT Online
(Created article) |
mNo edit summary |
||
| Line 1: | Line 1: | ||
[[File:JoiningBiscuits.png|300px|right]] | [[File:JoiningBiscuits.png|300px|right]] | ||
[https://en.wikipedia.org/wiki/Biscuit_joiner#Standard_biscuit_sizes '''Jointing Biscuits'''] ''(aka Biscuit Joiner or Plate)'' are small curved shaped pieces of very dry material compressed to a standard thickness of 4mm such that they swell slightly when wetted with glue and tighten in the joint. They are made usually of timber ''(e.g. [https://en.wikipedia.org/wiki/Beech Beech])'', [https://en.wikipedia.org/wiki/Medium-density_fibreboard MDF] or [https://en.wikipedia.org/wiki/Plywood Ply]. | [https://en.wikipedia.org/wiki/Biscuit_joiner#Standard_biscuit_sizes '''Jointing Biscuits'''] ''(aka Biscuit Joiner or Plate)'' are small curved shaped pieces of very dry material compressed to a standard thickness of 4mm such that they swell slightly when wetted with glue and tighten in the joint. They are made usually of timber ''(e.g. [https://en.wikipedia.org/wiki/Beech Beech])'', [https://en.wikipedia.org/wiki/Medium-density_fibreboard MDF] or [https://en.wikipedia.org/wiki/Plywood Ply]. If made from [https://en.wikipedia.org/wiki/Beech Beech] or similar natural wood, the grain direction is diagonal to increase strength. | ||
Revision as of 18:23, 4 February 2016
Jointing Biscuits (aka Biscuit Joiner or Plate) are small curved shaped pieces of very dry material compressed to a standard thickness of 4mm such that they swell slightly when wetted with glue and tighten in the joint. They are made usually of timber (e.g. Beech), MDF or Ply. If made from Beech or similar natural wood, the grain direction is diagonal to increase strength.
Biscuits come in three standard sizes, No. 0, No. 10, and No. 20. Biscuit Jointers have pre-set depth stops that match these sizes and Slot Cutters, for use with a Router, have spacer bearings to slide over the cutter shank and limit the depth of cut.