<div class="floatright"><dtamazon type="search" search="Wet
and Dry Paper"><img alt="WetDryPaper.jpg" src="/images/thumb/3/30/WetDryPaper.j
...e wet 40 to 600 grit for general
finishing of metals
and plastics
and 1000
and above for cutting back between coats of spray paint.
2 KB (236 words) - 14:55, 7 November 2017
...dia.org/wiki/Sandpaper#Grit_sizes '''grit sizes'''] ranging from 40 to 320 and used mainly for dry sanding of wood or paint removal.
=====Features and Applications=====
1 KB (190 words) - 09:37, 13 September 2016
...n.wikipedia.org/wiki/Sandpaper#Grit_sizes '''grit sizes'''] from 40 to 320 and is used principally to polish metals - especially steel.
...s, loosely in the hand when polishing on a lathe - it can become entangled and cause severe injury.
1 KB (188 words) - 09:34, 13 September 2016
...shaped teeth. Common ‘''cuts''’ of files are graded as smooth, second cut and bastard cut.
...filing is done horizontally as shown. File at and angle and change stance and direction of filing from time to time such that the file marks left previou
1 KB (218 words) - 09:58, 11 November 2016
...size'''] is given as the sieve mesh size per inch - low numbers for coarse and high for fine.
|'''[[Glasspaper|Sandpaper]]''', '''[[Glasspaper]]'''<br /> and '''[[Glasspaper|Garnet papers]]'''
3 KB (490 words) - 09:37, 11 October 2016
...shaped teeth. Common ‘''cuts''’ of files are graded as smooth, second cut and bastard cut.
[[File:Files.jpg|800px|center|below|Types of Files and Rasps]]
5 KB (776 words) - 11:05, 12 November 2017