Search results

[[File:AdhesiveTapes.jpg|700px|right|Adhesive Tapes]] [http://en.wikipedia.org/wiki/Adhesive_tape '''Adhesive tapes'''] provide a quick means of joining most materials together.

...asily be undone if required)''. The [[Glues and Pastes|'''glues''']], or [[Adhesive Types|'''adhesives''']], used most commonly are water, solvent, heat or che ...empting to glue it. Try out the best assembly sequence dry before applying adhesive.

{{Abrasives Buyers Guide}} =====Adhesive Tape=====

...p down the side to be hinged ''(this will provide support for the adhesive tape applied later)'', ...rap around the hinged side with strong fabric '''[[Adhesive Tapes|Adhesive Tape]]''' to create a 'hinge',

...gle tab. The top and bottom of the box are usually fastened using adhesive tape or staples. This package differs from '''[[Grocery Carton 1]]''' in that th {{Packaging Designer Guide}}

...gle tab. The top and bottom of the box are usually fastened using adhesive tape or staples. When this type of box is produced in large quantities it is eco {{Packaging Designer Guide}}

...' to thin sheet materials but a strong fabric '''[[Adhesive Tapes|Adhesive Tape]]''' can be used to create a 'hinge' suitable for this purpose. ...in position against the box body and wrap the '''[[Adhesive Tapes|Adhesive Tape]]''' around the edge to be 'hinged'.

...on to plastics sheet using '''[[Adhesive Tapes|Double-side Tape]]''', '''[[Adhesive Tapes|Foam Mounting Pads]]''' or similar. Underframes may be created by ''' ...more accessible alternative may be to mask off a design with tape or self-adhesive film and use a low voltage mini-engraver or similar, to create a ‘frosted

...ding '''[[Adhesive Tapes|Masking Tape]]''', or another self-adhesive paper tape, around the inside edge to provide a surface more easily glued. ...as indicated and fix to the carton using '''[[Adhesive Tapes|Double-Sided Tape]]'''

...e ties'''], '''[[Adhesive Tapes|gaffer tape]]''', '''[[Adhesive Tapes|duct tape]]''' or similar. {{Structures Buyers Guide (2)}}

...e Types|adhesive]]''' to make connections but '''[[Adhesive Tapes|adhesive tape]]''' is not allowed. * Conduct some tests to establish which is the most effective adhesive and consider how each joint can be provided with an adequate gluing surface

...ick Card]]''' and either '''[[Laminating|Laminated]]''', covered with self-adhesive book-covering film or varnished for example. ...ge ''(<span style="color: green">'''Note:''' you may have to allow for the tape width down the centre of the opened out board in your design</span>)''.

| Simple hinges can be made in paper and card by using adhesive tapes, drinking straws, stitching, paper fasteners, rivets or by simple sco *ADHESIVE TAPE is used by alternatively sticking it to the top of one side of the hinge an

* '''Self-Adhesive Veneer''' ...it flat on to the surface to be covered. It is available also as '''Edging Tape''', both as real wood veneer and plastic laminate, and this is most useful

* Add a self-adhesive paper tape, around the inside edges to provide a surface more easily glued to than the ...aterials|Thumb Tacks/Drawing Pins]]''' or '''[[Adhesive Tapes|Double-sided tape]]''';

...edge ''(e.g. stay at least 20mm away)'' and mark the centre with adhesive tape to provide a location for the drill point to stop it slipping around at the {{Glass and Ceramic Drills Buyers Guide}}

...rned inside out and resealed with '''[[Adhesive Tapes|double-side adhesive tape]]''' or a '''[[Hot Melt Glues|Glue Gun]]''' such that their plain card inne "Shiny" surfaces, such as plastics, foils and metals can be glued using '''[[Adhesive Types|solvent-based]]''' or '''[[Hot Melt Glues|hot-melt adhesives]]''' or

* The '''Hull''' will either need to be covered with plastic packaging tape, or plastic laminated 'shiny' card used, to make it water-resitant. ...he two ends together and temporarily hold with '''[[Adhesive Tapes|Masking Tape]]''', '''[[Stripwood_Technology_Tools|Pegs or Clips]]''';

...he two ends together and temporarily hold with '''[[Adhesive Tapes|Masking Tape]]'''; ...''Hull''' sides by running a bead of glue round the inside of the join and tape in position until the glue dries;

...a non-porous surface, may have to use a '''[[Adhesive Types|solvent-based adhesive]]''', such as balsa cement, or a '''[[Hot Melt Glues|glue gun]]'''. ...e ties'''], '''[[Adhesive Tapes|gaffer tape]]''', '''[[Adhesive Tapes|duct tape]]''' or similar.